Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
The following is the wiring diagram for the umbilical cables.
Below is the updated wire chart, which includes the Alt/color wires for cables that do not have all numbers.
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
This is a simple test to verify that the Unity Controller is sending power to the in-tank heaters. Disconnect the in-tank heater from the float tank and test with a multi-meter. Make sure the Unity software says the in-tank heater is turned on during this test.
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
Please note that all ozone towers that do not use the newer ball style should be upgraded for better performance and longevity.
The first video shows the in-depth process of removing and servicing the ozone injection tower.
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
In this video, we show how to do a simple test to verify that the In-line heater is getting power. The system must be running with water flowing or the safety flow switch will not be engaged and will cut the power to the heater.
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
The following video shows the step by step process for removing a motor from the Iwaki pump and installing a new motor.
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
This is a guide to assist you in setting up your Unity Control System.
Download the PDF below for the network configuration details and advanced configuration.
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
This the schematic call out for the Unity control box.
Unity-control-box-sml.jpg
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
Diagram for wiring on the 16 pin main cable and the 6 pin in tank heater cable.
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
The "Pump Schedule Enabled" button allows for transferring the maintenance heating in the Idle state from the pump and in-line booster heater to the in-tank heaters without the pump running. This is beneficial for commercial locations wanting to keep empty rooms quiet by not running the pumps during the open hours. For residential installations, this can be used so that the pump does not cut on during the overnight hours.
Once enabled the setting can be changed or disabled as needed.
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
This is the manufacturers manual for the Iwaki Magnetic Pump.
A copy of this booklet is included in the documentation section of the Unity Float Control software found in the system configuration window. A hard copy is included with every float system purchase.
PDF Link: Iwaki Pump Manual
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
The following is the documentation for installing the 45MP3 Auto-doser on the unity filtration system.
The pump runs at 1/3 ounce of liquid at 10 seconds of operation. 22GDP / 83.3 LPD
Make sure that the rollers on the dosing pump are extended, please refer to the following video for instructions. If the rollers are not extended, the system may draw H2O2 into the water during the filtration cycle while the ball valve is open during ozone injection, which typically lasts for 5 minutes.
The following section addresses chlorine balancing with the auto-doser
This is required as per Florida and other state regulations.
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
Below are example images of the Deluxe Float Suite plumbing.
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
These are example layouts for the Deluxe size Quest Float Suites.
PDF Link : QFS_DLX_Layouts
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
This is the dimensional schematic for the Deluxe Quest Float Suite.
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
This is the plumbing diagram for the Deluxe Quest Float Suite.
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
This is the guide for assembly and installation of the Quest Float Suites
You can download the PDF at the bottom of this article or reference the following images:
QFS Installation Documentation
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
These are the dimensional schematics of the Standard Quest Float Suite.
Weight for the individual parts are as follows:
Tub - 112 lbs
Long Side Wall - 74.5 lbs
Short Side Wall - 42 lbs
Download: Standard Quest Float Suite Dimensional Schematic, Rev C (PDF)
SKSUP2150_B-Quest-Float-Suite-Principal-Dimensions-Rev-B-1.jpg
Our support team can help with anything this article doesn't cover. Contact Superior Float Tanks support.
Superior Float Tanks is the industry’s top manufacturer of therapeutic floatation tanks and floatation tank equipment. We provide float suites/rooms, pods, float tank filtration systems, and installation services to companies, facilities, and individuals. We are a principal resource to the float tank industry, and we provide these services along with quality customer care. No one is more knowledgeable and can provide for your floatation needs like we can.
431 West 25th Street Norfolk, VA 23517
Email: info@superiorfloattanks.com
Office Phone: 757-500-4875
Accepts USD and USDT for payments.
